Shoei RF-SR Helmet - We are your local Shoei dealer. All Shoei products can be ordered.
The Shoei RF-SR Helmet takes every step possible to deliver a quiet, comfortable ride. The CWR-1 shield is held firmly against the eyeport using a constant tension sprung hinge design; this greatly reduces opportunities for wind ingress. The exterior shell of the RF-SR is wind tunnel optimized and manufactured in multiple sizes to keep the outer envelop as small as possible. A smaller exterior shell translates directly into less turbulence, neck strain and total weight. Elements of the padded liner are interchangeable to dial in the perfect fit. Each RF-SR is handmade in Japan to the highest standards and easily surpasses DOT and SNELL M2015 safety certifications.
Aerodynamic Shell Design:
Aerodynamic properties maximized through extensive wind tunnel and feedback from professional riders
Dual-Layer EPS liner enhances impact absorption and ventilation
Four shell and six EPS liner sizes increase fit options that help to comfortably fit most head sizes
Two upper air intake vents are positioned to maximize air volume into the helmet interior; hot air is exhausted through top outlet for a more comfortable ride
Lower intake vent absorbs air exhaled from the mouth to help eliminate shield fogging
Breath guard and chin curtain included
Lightweight Advanced Integrated Matrix Plus (AIM+):
High performance fiber materials are combined with extremely elastic organic fibers to create a shell structure that is ultra lightweight, rigid and resilient
The entire interior lining (cheek pads, upper liner, and chin strap covers) can be removed for cleaning, center and cheek pads can be replaced with optional thicknesses for a customizable fit
E.Q.R.S. (Emergency Quick Release System) allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet, enabling the helmet to be more easily removed from the head
Extra comfort provided by removable ear pads, breath guard, and chin curtain
Standard chin strap clip neatly secures chin strap
CWR-1 Shield and QR-E System:
CWR-1 shield features ribs along the top and bottom to improve rigidity and eliminate bending from wind pressure during opening and closing
Improved window beading features dual-layered dual lip construction that ensures a windproof and waterproof seal with every closure
Locking mechanism easily engages the shield lock when fully closed
Pinlock pins and EVO fog resistant lens insert included
Spring-loaded base plates offer quick shield changes
Five-stage rotating dial allows fine tuning of the base plate for easy shield adjustments
QR-E closure system allows for tool-less shield removal and installation, and provides an air-tight seal intended to significantly minimize wind noise
Note: Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States.
WHAT'S IN THE BOX
|XS||6 5/8 - 6 3/4||53-54||20 7/8 - 21 1/4|
|S||6 7/8 - 7||55-56||21 5/8 - 22|
|M||7 1/8 - 7 1/4||57-58||22 1/2 - 22 7/8|
|L||7 3/8 - 7 1/2||59-60||23 1/4 - 23 5/8|
|XL||7 5/8 - 7 3/4||61-62||24 - 24 3/8|
|XXL||7 7/8 - 8||63-64||24 3/4 - 25 1/8|
|XXXL||8 1/8 - 8 1/4||65-66||25 5/8 - 26|
How To Measure Your Head Size
- To determine where you fall on SHOEI's sizing chart (as a starting point for proper helmet fit), pass a soft, flexible tape measure horizontally around your head at a height of approximately one inch (2.5cm) above your eyebrows (the largest measurement around your forehead).
- Select the helmet size that is closest to your head measurement from the sizing guidelines above. If your head measurement falls between two helmet sizes, first try on the smaller of the two helmets.
THE PERFECT FIT
No helmet can protect the wearer against all unforeseeable high- and low-speed impacts. However, to help maximize head protection, the helmet must fit properly, and the retention system must be securely fastened under the chin. Failure to ride with a proper fitting helmet and securely fastened chinstrap is dangerous, as the helmet could come off during an accident, resulting in severe head trauma or death.
To determine the proper helmet fit and learn how to safely secure your chinstrap retention system, we recommend viewing SHOEI's "Helmet Fit" video at www.shoei-helmets.com/helmetfit, or consult with an authorized SHOEI dealer today. Proper fit is important not only for comfort, but for safety, as well.
Shoei RF-SR Full Face Helmet
- Product Code: RF-SR
- Availability: In Stock